530 T Pet-Preform Injection Molding Machine With Fully Improved Design Structure
OUCO is a factory focusing on the research and development of PET injection molding machines. There are now 4 ways to produce bottles, the methods are as follows,
1. Produced by extrusion blow molding machine
2. Two-step method: first use the injection machine to make the preform, and then use the blow molding machine to blow the bottle.
3. Vertical injection blowing machine with rotating platen and 3 working stations
4. Vertical injection blowing machine with rotary platen and 4 working stations
OUCO focuses on helping customers make preform injection molding machines. The equipment is stable and efficient, which can help our customers quickly expand the market and obtain huge profits.
Product Details
1.Adopt special design screw and high torque melt motor to facilitate the plasticizing and molding of PET material;
2. Equipped with ejector device, which is sufficient for the production of PET products;
3. Adopting high power electric pump system, which shortens the cycle time and improves the production efficiency.
Feature
Available from 600 to 33,000 kN
World’s best-selling injection molding machine
New high-drive servo system (developed by Haitian)
Fully improved design structure
Full closed-loop process, high repeat accuracy
Energy saving Interactive with open integration
| TECHNICAL PARAMETER TABLE | |
| INJECTION UNIT | SCREW DIAMETER | Mm | 95 |
| SCREW L/D RATIO | L/D | 24 |
| INJECTION CAPACITY (THEORETICAL) | cm3 | 3015 |
| INJECTION WEIGHT(PET) | g | 3317 |
| INJECTION PRESSURE | MPa | 149 |
| INJECTION RATE | g/s | 700 |
| PLASTICIZING CAPACITY | g/s | 95 |
| SCREW SPEED | rpm | 130 |
| CLAMPING UNIT | CLAMP FORCE | KN | 5300 |
| OPEN STROKE | mm | 830 |
| MAX. MOULD HEIGHT | mm | 830 |
| MIN. MOULD HEIGHT | mm | 330 |
| SPACE BWTWEEN TIE-BARS (W×H) | mm | 860*810 |
| EJECTOR STROKE | mm | 230 |
| EJECTOR FORCE | KN | 181 |
| EJECTOR NUMBER | n | 17 |
| OTHERS | PUMP PRESSURE | MPa | 16 |
| MOTOR POWER | KW | 55 |
| HEATING POWER | KW | 37.85 |
| MACHINE DIMENSION (L×W×H) | m | 9.05*2.14*2.61 |
| MACHINE WEIGHT | t | 21 |
| OIL TANK CAPACITY | L | 1156 |
Detail Pictures
Company Profile
Product Tags:
|
|
530 T Automated Injection Molding Machine Fully Improved Design Structure Images
|
